Are your Leak Detection services available in Hollis?

Yes, Masters Plumbing Service provides round-the-clock Leak Detection services directly in Hollis, OK.

How much does emergency service cost in Hollis?

We offer upfront, transparent pricing with no hidden fees for all service calls in Hollis.

🎙️ Find It Before You Open a Wall

Professional Leak Detection in Hollis, OK — Acoustic, Thermal & Pressure Methods

Name: Masters Plumbing Service
Telephone: +1-844-833-0201
Price range: $$

A water bill that jumped 30% with no change in usage. A ceiling stain that keeps reappearing after painting. A soft spot in flooring with no visible source. These are signs of a hidden leak that's been running long enough to cause structural damage — and every day it runs is money lost and damage accumulating. Masters Plumbing Service uses acoustic ground microphones, thermal imaging cameras, and precision pressure decay testing to locate leaks in Hollis homes without speculative demolition.

📞 Find My Leak — Call +1-844-833-0201

Acoustic Ground MicrophonesThermal Infrared CamerasPressure Decay TestingSlab & Wall Leak Specialists

Our Detection Methods

01
Acoustic MicrophonePressurized leaks create a detectable sound — amplified to locate the failure within inches
02
Thermal Infrared CameraActive leaks create temperature differentials on surfaces — we map the wet zone without cutting
03
Pressure Decay TestingConfirms active water loss and zones the failing branch before detection equipment deploys
04
Tracer Gas DetectionFor very slow leaks where acoustic methods aren't conclusive — sensitive to parts per million
05
Written Report for InsuranceFormatted for insurance submission — pressure test results and thermal imagery included

Licensed Leak Detection service in Hollis, OK - Masters Plumbing Service

Why Detection First

4 Detection Capabilities We Bring to Every Leak Detection Call

A pressure test tells us a leak exists. Detection equipment tells us precisely where.

🎙️

Acoustic Ground Microphone

Pressurized supply line leaks create a low-frequency sound as water escapes the pipe and contacts surrounding soil or structure. Our amplified listening devices filter background noise so we can triangulate the loudest point — often to within 6–12 inches of the actual break, through concrete slabs or behind drywall.

🌡️

Thermal Infrared Camera

Active water leaks create temperature differentials on the surfaces they contact. An infrared camera shows these as color-coded heat maps, revealing the wet zone inside a wall or under a floor without any cutting. A cold water leak behind drywall appears as a spreading cool zone; a hot water leak shows the inverse.

📉

Pressure Decay Testing

We isolate the supply system, pressurize to operating pressure, and monitor over a timed hold period. Any pressure drop confirms active water loss from the supply side. By isolating zones — hot side vs. cold side, section by section — we narrow down which branch is leaking before deploying detection equipment.

💨

Tracer Gas Detection

For leaks that don't produce sufficient acoustic signature — very slow leaks, polyethylene pipe, or leaks deep under concrete — we introduce a nitrogen/hydrogen tracer gas mixture into the isolated pipe and use a calibrated gas detector at the surface to find where the gas escapes. Sensitive to concentrations far below what produces an audible acoustic signal.

What We Locate

Leak Detection for Walls, Slabs, Pools & Irrigation

Hidden leaks occur in different locations throughout a property — each requiring a slightly different detection approach. Here's how we handle the most common scenarios in Hollis, OK.

Under Slab

Under-Concrete Supply Line Failure Location

Supply lines running under or through the concrete slab fail from corrosion, shifting, or manufacturing defects — and the leak is invisible from the surface but audible to acoustic equipment. We walk the floor on a grid pattern, map the loudest detection points, and triangulate to a specific floor location, typically within a square foot. Confirmed slab leak location is documented with marked coordinates for the repair crew.

Professional Leak Detection technician working in Hollis, OK

In-Wall

Hidden Pipe Failure Behind Finished Surfaces

We document the thermal anomaly, mark the approximate pipe location, and recommend a minimal access cut rather than a wide wall opening — typically saving hundreds in drywall repair costs.

Water Main

Main Line Leak Location in Hollis

We also perform leak correlation surveys for longer line runs, using two listening points to triangulate the failure location mathematically.

Pool & Irrigation

Pressure Testing for Pool Plumbing

Pool plumbing — suction and return lines buried between the equipment pad and the shell — develops leaks at fittings or in the pipe body that show as unexplained water loss. We pressure-test the pool plumbing circuit, isolate return and suction lines separately, and use acoustic detection to find which line and where.

24/7 Emergency Leak Detection experts in Hollis, OK

Insurance Docs

Leak Detection Report for Insurance Claims

Insurance claims for water damage from hidden leaks typically require documentation that the leak was not visible or detectable without specialized equipment. Our detection report includes: pressure test results confirming active water loss, detection method used, thermal imagery or acoustic mapping showing leak location, and technician certification information.

Commercial

Commercial Property Leak Detection in Hollis, OK

Commercial buildings have complex pipe networks where a supply or drain leak can go undetected through multiple floors before surfacing. We approach commercial detection systematically — zone-by-zone pressure isolation, thermal scan of suspect surfaces, and acoustic confirmation.

📞 Find My Leak — Call +1-844-833-0201

Our Process

How Our Leak Detection Process Works in Hollis, OK

Here's exactly how a Masters Plumbing Service leak detection call plays out in Hollis, OK.

Initial Water Loss Confirmation

This step confirms we're looking for a real leak rather than a meter error or normal appliance cycling.

Zone Isolation & Pressure Decay

Zone isolation turns "there's a leak somewhere in the house" into "the leak is on the hot side supply between the water heater and the master bath."

Detection Equipment Deployment

Within the isolated zone, we deploy thermal imaging first — scanning walls, floors, and ceilings for moisture anomalies. Then acoustic equipment confirms the specific pipe location and narrows it to the tightest possible point. Tracer gas is added if acoustic results aren't conclusive.

Written Report & Repair Options

You receive a written detection report including pressure test results, detection method summary, leak location relative to fixed reference points, and thermal imagery. If you want us to repair the leak, we quote immediately and can execute same-visit.

Customer Reviews

Real Leak Detection Reviews from Hollis

★★★★★

High-efficiency home with a slow leak — about 1.5 gallons per hour. The tech used tracer gas after pressure testing confirmed the loss but acoustic detection couldn't localize it clearly. Gas detection found the escape at a micro-fitting under the slab in the utility corridor. Impressive work for a very difficult leak to find.

— C. Thornton, Hollis

Hollis, OK · Slab Leak Detection

★★★★★

Our insurance company required professional leak detection documentation before approving the claim. Masters Plumbing Service's written report with pressure test data and thermal imagery was exactly what the adjuster needed. Claim approved. The detection cost was covered as part of the claim.

— B. Osei, Hollis, OK

Hollis, OK · In-Wall Leak / Insurance Doc

★★★★★

Commercial building with elevated water costs for six months. Masters Plumbing Service ran zone-by-zone pressure isolation across four floors, narrowed the loss to the third-floor kitchen supply branch, and located the failure with thermal imaging at a concealed valve body in the ceiling. No damage to the finished ceiling.

— T. Anand, Hollis, OK

Hollis, OK · Pool Line / Commercial

FAQ

What to Know Before Booking Leak Detection

If the meter test confirms water loss, call us before opening any walls. Our detection equipment locates the failure to within inches in most cases — which means a small, targeted access rather than speculative wall demolition.

The repair itself requires physical pipe access — typically a small targeted opening. But that's a completely different proposition from opening large wall sections while searching for an unknown leak location.

For pressurized supply lines in concrete or metal pipe, acoustic detection is typically accurate to within 6–18 inches under ideal conditions — quiet environment, no interference from other water use, metal pipe conducting sound efficiently. Thermal imaging is accurate to the size of the wet zone it reveals, which varies based on how long the leak has been running.

Yes. Our written detection report includes: technician credentials, equipment identification, pressure test methodology and results, detection method description, leak location with reference measurements, and supporting thermal imagery. This is the documentation format most insurance adjusters require to approve a concealed-leak water damage claim.

We don't rush the detection protocol. The acoustic hold time and thermal scan coverage determine accuracy — cutting them short produces uncertain results that cost more to act on.

The repair quote is given before any wall or floor is opened. You know the full cost of detection plus repair before anything is cut.

Professional Leak Detection in Hollis, OK — Acoustic, Thermal & Pressure Methods